API-STD-1104 - Welding Pipelines And Related Facilities, Standard For - Sevententh Edition
This standard covers the gas and arc welding of butt, fillet, and socket welds in carbon and low-alloy steel piping used in the compression, pumping, and transmission of crude petroleum, petroleum products, and fuel gases and, where applicable, covers welding on distribution systems.
ASME9 - Asme Boiler And Pressure Vessel Code Welding And Brazing Qualifications - 1974
AWS-B2.1 - Procedure, Welding, And Performance Qualification, Specification For
This specification provides requirements for the qualification of welding procedures.
AWS-B2.2 - Procedure, Brazing, And Performance Qualification, Standard For
AWS-C1.3 - Welding Coated Low Carbon Steels, Resistance-Recommended Practices For
AWS-C3.7 - Aluminum Brazing, Specification For
This specification presents minimum fabrication and quality requirements for brazing of aluminum and aluminum alloys.
AWS-C5.5 - Gas Tungsten Arc Welding, Recommended Practices For
AWS-D1.4 - Steel Reinforcing Structural Welding Code
AWS-D14.6 - Welding Of Rotating Elements Of Equipment, Specification For
This specification applies to the fabrication by welding of wrought or cast material used in the manufacture of the rotating elements of equipment, such as fans, pumps, compressors, etc.
AWS-D3.6 - Welding, Underwater, Specification For
This specification covers fabrication and quality assurance standards for underwater welding.
AWS-D9.1 - Sheet Metal Welding Code
This code provides qualification, workmanship, and inspection requirements for both arc welding (Part A) and braze welding (Part B) as they apply to the fabrication, manufacture, and erection of nonstructural sheet metal components and systems.
MIL-B-12672 - Braze-Welding, Oxyacetylene, Of Built-Up Metal Structures (S/S By Ansi/Aws-C3.4)
MIL-B-12673 - Brazing, Oxyacetylene, Of Built-Up Metal Structures
This specification applies to the oxyacetylene brazing of built-up metal structures fabricated either from ferrous or nonferrous base metal or combination thereof as accomplished by the use of suitably qualified flux and filler metal.
MIL-B-47043 - Brazing Alloy, 82 Fold-18 Nickel, Wire, Foil, Sheet And Strip
MIL-B-47291 - Brazing And Annealing Of Electromagnetic (Iron Cobalt Alloy) Poles To Austenictic Stainless Steel, Process For
MIL-B-47292 - Brazing, Aluminum, Process For
MIL-B-9972 - Brazing, Nickel Alloy, General Specification For (S/S By Aws-C3.6)
MIL-DTL-45210 - Welding, Resistance, Spot: Weldable Aluminum Alloys
This specification covers resistance spot welding procedures for weldable aluminum alloys.
MIL-HDBK-56 - Material And Material Processes Series Arc Welding
MIL-HDBK-58 - Thermal Joining Of Metals Processes Other Than Arc Welding (S/S By Mil-Hdbk-730)
MIL-HDBK-730 - Materials Joining
The purpose of this handbook is to provide Department of Defense engineering and quality assurance personnel with the basic principles and general knowledge of materials joining processes.
MIL-S-60902 - Soldering Electrical Connections For Nuclear Weapons Systems, Procedure For (S/S By Mil-Std-1460)
MIL-STD-1183 - Welding, Gas, Steels, Constructional, Readily Weldable, For Low Stressed Joints (S/S By Aws-D1.3)
This standard covers oxy-acetylene gas welding of readily weldable constructional steels when joint strength is not a consideration in the function of the part.
MIL-STD-1185 - Welding, High Hardness Armor
This standard covers the fabrication of weldments constructed of 1 inch (25.4 mm) maximum thickness, high hardness, rolled armor and steel attachments welded to the armor. It contains information relating to preparation and submission of welding procedures, preparation of workmanship specimens, joint welding procedures, inspection of weldments and radiographic data.
MIL-STD-1252 - Inertia Friction Welding Process, Procedure And Performance Qualification
This standard contains design requirements and design consideration for the use of inertia friction welding. cation of welding procedures, and qualification of operators using these procedures and equipment.
MIL-STD-1261 - Arc Welding Procedures For Constructional Steels (See Notice 5 For Replacement Information)
This standard covers the classification of metal-arc welding of constructional steels and the procedures required for documentation before production welding.
MIL-STD-1372 - Process For Soldering Accident Dosimeter To Film Badge Holder For Radiac Detecting Element
This standard establishes the process for soldering the Accident Dosimeter (figure 1) to the Film Badge Type Holder (figure 2).
MIL-STD-1595 - Qualification Of Aircraft, Missile & Aerospace Fusion Welders (Sae-Ams-Std-1595)
This standard establishes the procedure for qualification of welders and welding operators engaged in the welding of aircraft, missiles, other aerospace equipment, and their parts and accessories by fusion welding processes. This standard is applicable to aircraft, missile, and aerospace ground support equipment or other welding, when included in the contracting documetns or when invoked in the absence of a specified welder qualification document.
MIL-STD-1688 - Fabrication, Welding And Inspection Of Hy-80/100 Submarine Applications (See Notice 2 For Replacement Information)
MIL-STD-1689 - Fabrication, Welding, And Inspection Of Ships Structure
MIL-STD-1692 - Underwater Welding Requirements For Naval Facilities (S/S By Aws-D3.6.)
MIL-STD-1693 - Fabrication, Welding And Inspection Of Hyperbaric Chambers And Other Critical Land-Based Structures
MIL-STD-1877 - Brazing, Nickel, High Temperature Vacuum (Metric)
This standard covers the requirements for brazing in a vacuum atmosphere furnace using nickel base brazing alloys.
MIL-STD-1881 - Brazing Silver, General Process For
The procedures covered by this standard are intended to insure silver brazing operations meet prescribed requirements.
MIL-STD-1892 - Welding, Arc And Oxyfuel Gas, Process And Requirements For
This standard covers the arc and oxyfuel gas processes and requirements for the welding of gas turbine tank engine components whereby fusion occurs in the welded joints.
MIL-STD-1941 - Metal-Arc Welding Of Homogeneous Armor (See Notice 6 For Replacement Information)
MIL-STD-1943 - Welding Repair Of Steel Castings (Other Than Armor) Metal-Arc, Manual (S/S By Astm-A488/A488M)
This standard covers the requirements for manual-arc welding for the repair of readily weldable steel castings, in connection with production or maintenance in field or at storage areas. This does not cover the repair welding of armor castings.
MIL-STD-1946 - Welding Of Aluminum Alloy Armor (See Notice 4 For Replacement Information)
This standard covers requirements for the welding of specified aluminum alloy armor including ballistic shock testing, weld design criteria, and acceptance standards for evaluation of weldments.
MIL-STD-1947 - Ultrasonic Welding Of Aluminum And Aluminum Alloy Materials
This standard established the requirements and procedures for joining assemblies by the ultrasonic welding process.
MIL-STD-20 - Welding Terms And Definitions (Use Aws A3.0-69)
MIL-STD-2103 - Welding, Electron Beam Requirements For
This standard covers the requirements for welding rocket motor case components by the electron beam (EB) welding process.
MIL-STD-2104 - Welding, Tungsten Arc, Gas, Manual (Gtaw-Ma) Requirements For
This standard covers the requirements for welding rocket motor case components by the manual gas tungsten are welding (GTAW-MA).
MIL-STD-2149 - Standard Procedures For Explosion Testing Ferrous And Non-Ferrous Metallic Materials And Weldments (See Notice 3 For Replacement Information)
This standard covers explosion testing used to evaluate ferrous and non-ferrous base materials, welding filler materials and welding procedures when required by applicable specifications, contracts, acquisitioning documents and other authorities.
MIL-STD-22 - Welded Joint Design
This standard covers welded joint designs for manual, semi-automatic, and automatic arc and gas welding processes for use on metals and weldments, as applicable, when invoked by a fabrication document such as Navsea 0900-lf-000-1000 or MIL-STD- 278. The welded joint designs shown herein represent standard joint designs used in welded fabrication and are not intended to be all inclusive. Nodifications to these welded joint designs, other than those permitted by this standard, may be used subject to the approval of the authorized agent (see 3.2).
MIL-STD-2219 - Fusion Welding for Aerospace Applications (S/S by AWS-D17.1)
The scope of this document is to provide minimum requirements for weld filler materials, workmanship, inspection and record requirements for fusion welding of alloys applicable to aircraft, missiles, other aerospace equipment, their parts and accessories.
MIL-STD-248 - Welding And Brazing Procedure And Performance Qualification (Replacement Document Navsea Tech Pub S9074-Aq-Gib-010/248)
MIL-STD-278 - Welding And Casting Standard (Replacement Document Navsea Tech Pub S9074-Ar-Gib-010/278)
MIL-STD-336 - Welding, Flash, Standard Low Carbon Steel (S/S By Mil-Hdbk-507)
MIL-STD-418 - Mechanical Test For Welded Joints (Use Ansi/Aws B4.0)
MIL-STD-645 - Dip Brazing Of Aluminum Alloys
This standard covers the requirements for the joining of aluminum alloys by dip brazing, employing an aluminum base filler metal and flux bath.
MIL-T-5021 - Test, Aircraft And Missile Welding Operators Qualification (See Mil-Std 1595)
This specification covers the procedure for qualification of welders and welding operators engaged in the welding of aircraft, aircraft parts and accessories, missile, and missle parts and accessories, by fusion welding methods (see 6.2). This specification is not applicable to aircraft and missile ground equipment.
MIL-W-12332 - Welding, Resistance, Spot, Seam, And Projection; For Fabricating Assemblies Of Low-Carbon Steel
This specification covers the spot, seam, and projection, resistance welding of low-carbon steel fabricated assemblies.
MIL-W-13773 - Welding Repair Of Steel Castings (Other Than Armor) Metal Arc, Manval) (S/S By Mil-Std-1943)
MIL-W-13779 - Welding, Metal Arc, Steels, Constructional, Readily Weldable, For Low-Stressed Joints (S/S By Mil-Std-1261)
MIL-W-18326 - Welding Of Magnesium Alloys, Gas And Arc, Manual And Machine Processes For (S/S By Mil-Std-2219)
MIL-W-21157 - Weldment, Steel, Carbon And Low Alloy (Yield Strength 30,000 - 60,000 Ps1
This specification covers the requirements for steel weldments fabricated by metal electrode welding processes.
MIL-W-22248 - Weldments, Aluminum And Aluminum Alloy
This specification covers the general requirements for aluminum and aluminum alloy weldments fabricated by the inert-gas metal-arc and inert-gas tungsten-arc welding processes.
MIL-W-41 - Welding Of Armor, Metal-Arc, Manual, With Austenitic Electrodes; For Aircraft (S/S By Mil-Std-1941)
MIL-W-45205 - Welding, Gas Metal-Arc And Gas Tungsten-Arc, Aluminum Alloys, Readily Weldable For Structures, Excluding Armor (See Notice 2 For Replacement Information)
This specification covers the welding of aluminum alloys for structural applications other than armor by the gas metal-arc or gas tungsten-arc welding process.
MIL-W-45206 - Welding, Aluminum Alloy Armor (See Notice 2 For Replacement Information)
MIL-W-45211 - Welding, Stud, Aluminum (See Notice 2 For Replacement Information)
This specification covers the welding of aluminum studs or similar parts to aluminum base materials.
MIL-W-45223 - Welding, Spot, Hardenable Steels
MIL-W-46086 - Welding Of Homogeneous Armor By Metal Arc Processes (See Notice 2 For Replacement Information)
MIL-W-46132 - Welding, Fusion, Electron Beam, Process For (S/S By Sae-Ams2680 And Sae-Ams2681)
This specification covers the requirements for the electron beam fusion welding process.
MIL-W-46154 - Welding, Resistance, Spot And Projection For Fabricating Assemblies Of Carbon Steel Sheets
This specification covers the spot and projection resistance welding of carbon steel sheet fabricated assemblies in the carbon range of 0.40 to 0.60 percent (see 4.1 and 8.1).
MIL-W-46870 - Welding Of Electronic Circuitry, Process (See Notice 2 For Replacement Information)
MIL-W-47091 - Welding, Arc And Gas; For Fabricating Ground Equipment For Rockets And Guided Missiles
This specification covers electric arc and gas welding of metallic members in ground handling equipment for rockets and guided missiles.
MIL-W-47268 - Welding, Percussive, Process For
MIL-W-62160 - Welding, Flash, Standard Low Carbon Steel (S/S By Mil-Std-336)
MIL-W-62162 - Welding, High Hardness Armor (S/S By Mil-Std 1185)
MIL-W-62163 - Welding, Gas, Steels, Constructional, Readily Weldable, For Low-Stressed Joints (S/S By Mil Std 1183)
MIL-W-8604 - Welding, Fusion; Aluminum Alloys; Process And Performance Of (S/S By Mil-Std-2219)
MIL-W-8611 - Welding, Metal Arc And Gas, Steels, And Corrosion And Heat Resistant Alloys; Process For (S/S By Mil-Std-2219)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business