MIL-STD-2219 Fusion Welding for Aerospace Applications S/S by AWS-D17.1The scope of this document is to provide minimum requirements for weld filler materials, workmanship, inspection and record requirements for fusion welding of alloys applicable to aircraft, missiles, other aerospace equipment, their parts and accessories.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43

MIL-STD-2219A

w/CHANGE 1

4.10.2.2 Qualification records

4.10.2.2.1 Welding procedure qualification

These records should be as specified by AWS 82.1.

4.10.2.2.2 Welder and welding operator qualification

These records shall be as required by AWS D17.1 section 4.

4.10.2.2.3 NOE personnel qualification

Records of personnel qualification shall be maintained in accordance with AIA/NAS410.

4.10.2.3 NOE records

4.10.2.3.1 Radiographic inspection

These records shall be as required by ASTM-E1742.

4.10.2.3.2 Ultrasonic inspection

These records shall be as required by SAE-AMS-STD-2154.

4.10.2.3.3 Magnetic particle inspection

These records shall be as required by ASTM-E1444.

4.10.2.3.4 Penetrant inspection

These records shall be as required by ASTM-E1417.

4.10.2.4 Inspection records

Each contractor shall ensure that the records, including radiographic films, compiled for his materials, components or weldments are retained for a period of five years for Class A or B welds and one year for Class C welds following acceptance of the weld. They shall be available for review by the cognizant engineering organization upon request.

4.10.2.5 Workmanship

Acceptable quality and completeness of workmanship shall be assured by a record of inspection completion as the work progresses from prefabrication through completion. The record of workmanship shall be verified by the inspector's signature or assigned code or stamp.